Medtronic Onyx 18 Liquid Embolic System (LES kit) | REF 105-7100-060
Medtronic Onyx 18 Liquid Embolic System (LES) kit, REF 105-7100-060, is a non-adhesive liquid embolic agent supplied with DMSO solvent for endovascular embolization procedures.
The Terumo Neuro RePHIL PHIL 25% Kit (Standard / 16 cSt), REF LEN10250RE, is a precipitating hydrophobic injectable liquid (PHIL) embolic agent supplied as a sterile, single-use kit intended for endovascular embolization procedures. The 25% concentration in the Standard 16 cSt viscosity is designed to provide a controlled, cohesive cast during fluoroscopically guided delivery through a compatible DMSO-resistant microcatheter.
Key Features
Non-adhesive precipitating liquid embolic based on a copolymer dissolved in DMSO.
Inherent radiopacity via covalently bonded iodine, eliminating the need for tantalum suspension or shaking.
25% polymer concentration in the Standard 16 cSt viscosity tier for cohesive cast formation.
Single-use sterile kit configuration for procedural readiness.
Designed for delivery through DMSO-compatible microcatheters under fluoroscopic visualization.
Clinical Applications
Endovascular embolization of vascular lesions in the peripheral and neurovasculature, where indicated and consistent with the manufacturer's Instructions for Use and applicable regional clearances. Specific indications, contraindications and patient selection criteria are defined by the manufacturer's IFU and are not specified here.
Product Information
Brand: Terumo Neuro
Category: Liquid Embolic Agents
Product: RePHIL PHIL 25% Kit, Standard viscosity (16 cSt)
REF/UPN: LEN10250RE
Concentration: 25% copolymer in DMSO
Viscosity Tier: Standard (16 cSt)
Radiopacity: Intrinsic (iodine covalently bonded to copolymer)
Configuration: Sterile, single-use kit
Fill Volume per Syringe: Not specified in the located sources
Compatible Microcatheter: DMSO-compatible; specific compatibility list not specified in the located sources
Storage Conditions: Not specified in the located sources
Shelf Life: Not specified in the located sources
Regulatory Status: Refer to manufacturer documentation for region-specific clearances.
REF / UPNLEN10250RE
Size
Terumo Neuro RePHILPHIL 25% kitLEN10250REprecipitating hydrophobic injectable liquidliquid embolic agentnon-adhesive liquid embolicDMSO compatible embolicintrinsic radiopaque embolicendovascular embolizationneurovascular embolic agentperipheral embolization16 cSt PHIL standardTerumo Neuro liquid emboliccopolymer embolic agentB2B medical device sourcing
Related Products
Related products from the same category
Medtronic Onyx 34 Liquid Embolic System (LES kit) | REF 105-7100-080
Medtronic Onyx 34 Liquid Embolic System (LES) kit, REF 105-7100-080, a non-adhesive ethylene vinyl alcohol (EVOH) copolymer liquid embolic agent supplied with DMSO solvent for endovascular embolization procedures.
Medtronic Onyx LES Vial Mixer | REF 103-1205-001
Medtronic Onyx LES Vial Mixer (REF 103-1205-001) — accessory device intended to agitate and homogenize Onyx Liquid Embolic System vials prior to endovascular use.
Terumo Neuro PHIL 25% Liquid Embolic System Starter Kit (Standard / 16 cSt) | REF LEN10250
Terumo Neuro PHIL 25% Liquid Embolic System Starter Kit (Standard / 16 cSt), REF LEN10250 — precipitating hydrophobic injectable liquid embolic agent supplied as a starter kit configuration for neurovascular and peripheral embolization procedures.
Terumo Neuro PHIL 30% Liquid Embolic System Starter Kit (Medium / 36 cSt) | REF LEN10300
Terumo Neuro PHIL 30% Liquid Embolic System Starter Kit, medium viscosity (36 cSt), REF LEN10300 — precopolymer-based non-adhesive liquid embolic agent for endovascular embolization procedures.
Terumo Neuro PHIL 35% Liquid Embolic System Starter Kit (High / 72 cSt) | REF LEN10350
Terumo Neuro PHIL 35% Liquid Embolic System Starter Kit (High viscosity, 72 cSt), REF LEN10350 — precipitating hydrophobic injectable liquid embolic for neurovascular and peripheral embolization procedures.
Terumo Neuro PHIL LV Liquid Embolic System Starter Kit (Low / 12 cSt) | REF LEN10LV250
Terumo Neuro PHIL LV Liquid Embolic System Starter Kit (Low viscosity, 12 cSt) — REF LEN10LV250. Precision liquid embolic kit for neurovascular and peripheral embolization workflows.
Terumo Neuro RePHIL PHIL 30% Kit (Medium / 36 cSt) | REF LEN10300RE
Terumo Neuro RePHIL PHIL 30% Kit (Medium viscosity, 36 cSt) liquid embolic system, REF LEN10300RE, supplied as a precipitating non-adhesive embolic agent for endovascular embolization procedures.
Terumo Neuro RePHIL PHIL 35% Kit (High / 72 cSt) | REF LEN10350RE
Terumo Neuro RePHIL PHIL 35% Kit (High viscosity, 72 cSt) — precipitating hydrophobic injectable liquid embolic, REF LEN10350RE.
Terumo Neuro RePHIL PHIL LV Kit (Low / 12 cSt) | REF LEN10LV250RE
Terumo Neuro RePHIL PHIL LV Kit (Low viscosity, 12 cSt) precipitating hydrophobic injectable liquid embolic system for peripheral embolization, supplied as a single-use kit (REF LEN10LV250RE).
Buyer support
Frequently asked questions about Terumo Neuro RePHIL PHIL 25% Kit (Standard / 16 cSt) | REF LEN10250RE
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.