Medtronic Onyx 18 Liquid Embolic System (LES kit) | REF 105-7100-060
Medtronic Onyx 18 Liquid Embolic System (LES) kit, REF 105-7100-060, is a non-adhesive liquid embolic agent supplied with DMSO solvent for endovascular embolization procedures.
The Medtronic Onyx 34 Liquid Embolic System (LES) (REF 105-7100-080) is a non-adhesive liquid embolic agent designed for controlled endovascular embolization. Onyx 34 contains ethylene vinyl alcohol (EVOH) copolymer dissolved in dimethyl sulfoxide (DMSO) and suspended micronized tantalum powder for radiopacity under fluoroscopy. Upon contact with blood, DMSO dissipates and the EVOH copolymer precipitates to form a spongy, cohesive embolic cast. Onyx 34 is the higher-viscosity formulation (nominally 34 cP) intended for higher-flow vascular lesions.
Key Features
- Non-adhesive EVOH copolymer embolic that precipitates on contact with blood to form a cohesive cast.
- Higher viscosity (34 cP nominal) formulation engineered for higher-flow lesions and proximal flow control.
- Tantalum micronized powder provides intrinsic radiopacity for continuous fluoroscopic visualization during delivery.
- DMSO-compatible delivery intended for use with DMSO-compatible microcatheters and supplied DMSO vial for catheter priming.
- Lyophobic, cohesive precipitation supports controlled, stepwise injection with reflux management.
- Single-use, sterile kit packaged for procedural readiness.
Clinical Applications
- Endovascular embolization in the neurovasculature and peripheral vasculature, as defined by the manufacturer's Instructions for Use.
- Typically referenced in the literature for embolization of brain arteriovenous malformations (AVMs) and other selected vascular lesions where a higher-viscosity liquid embolic is appropriate.
- Intended use, indications, contraindications, warnings and precautions are governed by the official Medtronic IFU for the specific market of distribution.
Product Information
- Brand: Medtronic
- Product: Onyx 34 Liquid Embolic System (LES) kit
- REF / UPN: 105-7100-080
- Category: Liquid Embolic Agents
- Active component: Ethylene vinyl alcohol (EVOH) copolymer with micronized tantalum in DMSO
- Viscosity: 34 cP (nominal)
- Kit contents: Onyx 34 vial(s), DMSO vial, and delivery syringes as configured by the manufacturer
- Sterility: Sterile, single-use
- Storage: Per manufacturer IFU
- Regulatory status, indications and compatibility: Not specified in the located sources; refer to the official Medtronic IFU and local regulatory labeling.
REF / UPN105-7100-080
Size
Medtronic Onyx 34Onyx 34 LESOnyx Liquid Embolic SystemREF 105-7100-080liquid embolic agentEVOH copolymer embolicethylene vinyl alcohol embolicDMSO compatible embolictantalum radiopaque embolicneurovascular embolizationperipheral embolizationAVM embolizationendovascular embolizationMedtronic neurovascularinterventional radiology supplies
Related Products
Related products from the same category
Medtronic Onyx LES Vial Mixer | REF 103-1205-001
Medtronic Onyx LES Vial Mixer (REF 103-1205-001) — accessory device intended to agitate and homogenize Onyx Liquid Embolic System vials prior to endovascular use.
Terumo Neuro PHIL 25% Liquid Embolic System Starter Kit (Standard / 16 cSt) | REF LEN10250
Terumo Neuro PHIL 25% Liquid Embolic System Starter Kit (Standard / 16 cSt), REF LEN10250 — precipitating hydrophobic injectable liquid embolic agent supplied as a starter kit configuration for neurovascular and peripheral embolization procedures.
Terumo Neuro PHIL 30% Liquid Embolic System Starter Kit (Medium / 36 cSt) | REF LEN10300
Terumo Neuro PHIL 30% Liquid Embolic System Starter Kit, medium viscosity (36 cSt), REF LEN10300 — precopolymer-based non-adhesive liquid embolic agent for endovascular embolization procedures.
Terumo Neuro PHIL 35% Liquid Embolic System Starter Kit (High / 72 cSt) | REF LEN10350
Terumo Neuro PHIL 35% Liquid Embolic System Starter Kit (High viscosity, 72 cSt), REF LEN10350 — precipitating hydrophobic injectable liquid embolic for neurovascular and peripheral embolization procedures.
Terumo Neuro PHIL LV Liquid Embolic System Starter Kit (Low / 12 cSt) | REF LEN10LV250
Terumo Neuro PHIL LV Liquid Embolic System Starter Kit (Low viscosity, 12 cSt) — REF LEN10LV250. Precision liquid embolic kit for neurovascular and peripheral embolization workflows.
Terumo Neuro RePHIL PHIL 25% Kit (Standard / 16 cSt) | REF LEN10250RE
Terumo Neuro RePHIL 25% liquid embolic kit (Standard, 16 cSt) for endovascular embolization, supplied as a single-use sterile kit (REF LEN10250RE).
Terumo Neuro RePHIL PHIL 30% Kit (Medium / 36 cSt) | REF LEN10300RE
Terumo Neuro RePHIL PHIL 30% Kit (Medium viscosity, 36 cSt) liquid embolic system, REF LEN10300RE, supplied as a precipitating non-adhesive embolic agent for endovascular embolization procedures.
Terumo Neuro RePHIL PHIL 35% Kit (High / 72 cSt) | REF LEN10350RE
Terumo Neuro RePHIL PHIL 35% Kit (High viscosity, 72 cSt) — precipitating hydrophobic injectable liquid embolic, REF LEN10350RE.
Terumo Neuro RePHIL PHIL LV Kit (Low / 12 cSt) | REF LEN10LV250RE
Terumo Neuro RePHIL PHIL LV Kit (Low viscosity, 12 cSt) precipitating hydrophobic injectable liquid embolic system for peripheral embolization, supplied as a single-use kit (REF LEN10LV250RE).
Buyer support
Frequently asked questions about Medtronic Onyx 34 Liquid Embolic System (LES kit) | REF 105-7100-080
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.