FRED Junior System 2.5 | REF FREDJR2508
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2508) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
The Stryker Surpass Evolve Flow Diverter (REF FD50017) is a self-expanding, braided cobalt-chromium and platinum-tungsten flow diverting stent designed for endovascular reconstruction of the parent artery in the management of intracranial aneurysms. Configured at 5.00 mm nominal diameter x 17 mm working length, this device is intended to redirect blood flow away from the aneurysm sac while preserving flow in adjacent perforators and side branches, supporting progressive aneurysm thrombosis and neointimal remodeling.
Key Features
- 64-wire braided construction combining cobalt-chromium and platinum-tungsten filaments for radial support and fluoroscopic visibility
- Nominal sizing of 5.00 mm diameter x 17 mm length for targeted vessel reconstruction
- Self-expanding design intended to provide consistent wall apposition across the treatment segment
- Pre-loaded on a delivery system engineered for navigation through standard 0.027 inch inner diameter microcatheters (refer to current IFU for compatibility)
- Radiopaque markers to support accurate placement, deployment, and post-deployment assessment
- Resheathing capability prior to final deployment as described in the manufacturer Instructions for Use
Clinical Applications
- Endovascular flow diversion for intracranial aneurysms in adult patients
- Reconstruction of parent vessels in selected wide-necked, large, or complex aneurysm morphologies
- Use in neurointerventional procedures performed by trained physicians in appropriately equipped angiography suites
- Indications, contraindications, warnings, and patient selection criteria are defined in the current Stryker Surpass Evolve Instructions for Use
Product Information
- Brand: Stryker
- Product: Surpass Evolve Flow Diverter
- REF / UPN: FD50017
- Category: Flow Diverter
- Nominal Diameter: 5.00 mm
- Working Length: 17 mm
- Implant Material: Cobalt-chromium with platinum-tungsten braid wires
- Delivery System / Microcatheter Compatibility: Not specified in the located sources; refer to current IFU
- Sterility: Single-use, sterile (refer to packaging)
- Regulatory Status: Not specified in the located sources; verify regional clearance prior to procurement
REF / UPNFD50017
Size5.00 x 17, 17 mm
Stryker Surpass EvolveSurpass Evolve flow diverterFD50017flow diverter 5.00 x 17 mmintracranial flow diverterneurovascular flow diverterbraided flow diverting stentintracranial aneurysm treatmentneurointerventional implantendovascular aneurysm deviceStryker neurovascularcobalt chromium flow diverterwide neck aneurysm deviceparent vessel reconstruction stentB2B neurovascular sourcing
How It Works
1
Submit Your Request
Tell us what product you need and share a few details.
2
We Match You
We connect your request with the most relevant verified brands.
3
Receive Offers
Relevant supplier options can respond with availability, documentation context, and quote details.
Related Products
Related products
FRED Junior System 2.5 | REF FREDJR2513
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2513) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 2.5 | REF FREDJR2520
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2520) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller-diameter parent vessels.
FRED Junior System 2.5 | REF FREDJR2526
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2526) is a low-profile flow diverter designed for the endovascular treatment of intracranial aneurysms in distal and small-vessel anatomy.
FRED Junior System 3.0 | REF FREDJR3009
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3009) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller distal vessels.
FRED Junior System 3.0 | REF FREDJR3014
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3014) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 3.0 | REF FREDJR3021
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3021) — flow diverter device intended for neurovascular use; specific dimensional and configuration details: Not specified in the located sources.
FRED Junior System 3.0 | REF FREDJR3027
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3027) is a low-profile flow diverter device intended for endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED System 3.5 | REF FRED3507
Terumo Neuro FRED System 3.5 (REF FRED3507) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3511
Terumo Neuro FRED System 3.5 (REF FRED3511) flow diverter for endovascular neurovascular procurement.
FRED System 3.5 | REF FRED3516
Terumo Neuro FRED System 3.5 (REF FRED3516) is a flow diverter device designed for endovascular treatment of intracranial aneurysms, supplied as a sterile, single-use implant with delivery system.
FRED System 3.5 | REF FRED3524
FRED System 3.5 (REF FRED3524) by Terumo Neuro is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3536
Terumo Neuro FRED System 3.5 (REF FRED3536) — Flow Re-Direction Endoluminal Device for endovascular treatment of intracranial aneurysms.
FRED System 4.0 | REF FRED4007
Terumo Neuro FRED System 4.0 (REF FRED4007) is a flow diverter device designed for the endovascular treatment of intracranial aneurysms, featuring a dual-layer braided self-expanding stent design.
Buyer support
Frequently asked questions about Stryker Surpass Evolve Flow Diverter 5.00 x 17 mm | REF FD50017
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.