FRED Junior System 2.5 | REF FREDJR2508
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2508) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
The Stryker Surpass Evolve Flow Diverter (REF FD45030) is a self-expanding braided intracranial implant designed for endovascular reconstruction of the parent artery in the treatment of intracranial aneurysms. This 4.50 mm x 30 mm configuration is part of the Surpass Evolve platform, which uses a 64-wire braid construction intended to deliver consistent metal coverage and porosity for flow diversion across a range of vessel diameters.
Key Features
- Dimensions: 4.50 mm nominal diameter x 30 mm nominal length
- Reference: FD45030
- Construction: 64-wire braided design combining cobalt-chromium and platinum-tungsten wires for radiopacity and structural support
- Delivery: Pre-loaded on a delivery system intended for use through a compatible microcatheter; resheathing characteristics described in the manufacturer IFU
- Visualization: Integrated radiopaque elements to support fluoroscopic placement
- Design intent: Consistent porosity and pore density across sizes to support flow diversion
Clinical Applications
- Endovascular flow diversion for intracranial aneurysms in appropriately sized parent arteries
- Reconstruction of the parent vessel as an alternative or adjunct to coil embolization
- Use within neurointerventional procedures performed by trained operators
- Indications, contraindications, vessel sizing and patient selection: refer to the official Stryker Surpass Evolve Instructions for Use
Product Information
- Brand: Stryker
- Product line: Surpass Evolve Flow Diverter
- Category: Flow diverter / neurovascular implant
- REF/UPN: FD45030
- Size: 4.50 x 30 mm
- Sterility: Supplied sterile, single-use (refer to label)
- Storage and shelf life: Not specified in the located sources
- Compatible microcatheter and accessory requirements: Refer to the official Stryker IFU
- Regulatory status: Availability and approved indications vary by country; verify local regulatory clearance prior to ordering
REF / UPNFD45030
Size4.50 x 30, 30 mm
Stryker Surpass EvolveSurpass Evolve flow diverterFD45030flow diverter 4.50 x 30 mmintracranial aneurysm deviceneurovascular implantendovascular aneurysm treatmentbraided flow diverterStryker neurovascular64-wire flow diverterparent artery reconstructionneurointervention devicecerebral aneurysm flow diverterStryker FD45030flow diversion stent
How It Works
1
Submit Your Request
Tell us what product you need and share a few details.
2
We Match You
We connect your request with the most relevant verified brands.
3
Receive Offers
Relevant supplier options can respond with availability, documentation context, and quote details.
Related Products
Related products
FRED Junior System 2.5 | REF FREDJR2513
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2513) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 2.5 | REF FREDJR2520
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2520) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller-diameter parent vessels.
FRED Junior System 2.5 | REF FREDJR2526
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2526) is a low-profile flow diverter designed for the endovascular treatment of intracranial aneurysms in distal and small-vessel anatomy.
FRED Junior System 3.0 | REF FREDJR3009
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3009) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller distal vessels.
FRED Junior System 3.0 | REF FREDJR3014
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3014) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 3.0 | REF FREDJR3021
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3021) — flow diverter device intended for neurovascular use; specific dimensional and configuration details: Not specified in the located sources.
FRED Junior System 3.0 | REF FREDJR3027
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3027) is a low-profile flow diverter device intended for endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED System 3.5 | REF FRED3507
Terumo Neuro FRED System 3.5 (REF FRED3507) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3511
Terumo Neuro FRED System 3.5 (REF FRED3511) flow diverter for endovascular neurovascular procurement.
FRED System 3.5 | REF FRED3516
Terumo Neuro FRED System 3.5 (REF FRED3516) is a flow diverter device designed for endovascular treatment of intracranial aneurysms, supplied as a sterile, single-use implant with delivery system.
FRED System 3.5 | REF FRED3524
FRED System 3.5 (REF FRED3524) by Terumo Neuro is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3536
Terumo Neuro FRED System 3.5 (REF FRED3536) — Flow Re-Direction Endoluminal Device for endovascular treatment of intracranial aneurysms.
FRED System 4.0 | REF FRED4007
Terumo Neuro FRED System 4.0 (REF FRED4007) is a flow diverter device designed for the endovascular treatment of intracranial aneurysms, featuring a dual-layer braided self-expanding stent design.
Buyer support
Frequently asked questions about Stryker Surpass Evolve Flow Diverter 4.50 x 30 mm | REF FD45030
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.