FRED Junior System 2.5 | REF FREDJR2508
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2508) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
The Stryker Surpass Evolve Flow Diverter (REF FD40015) is a self-expanding, braided flow-diverting stent intended for endovascular reconstruction of the parent artery in the treatment of intracranial aneurysms. This configuration features a 4.00 mm nominal vessel diameter and a 15 mm working length, supplied preloaded on a delivery system for use through a compatible microcatheter.
Key Features
- 64-wire braided construction using cobalt chromium and platinum tungsten alloy filaments for radiopacity and consistent mesh density across the working length
- Single-layer flow-diverting design engineered to redirect blood flow away from the aneurysm sac while preserving perforator and side-branch flow
- Nominal sizing: 4.00 mm diameter x 15 mm length (REF FD40015)
- Preloaded delivery system intended for use through a compatible microcatheter; refer to the manufacturer IFU for the specified inner diameter requirement
- Resheathable and repositionable within manufacturer-defined limits prior to final detachment to support accurate landing zone placement
- Radiopaque markers on the implant and delivery wire to aid fluoroscopic visualization during deployment
- Sterile, single-use packaging
Clinical Applications
- Endovascular treatment of intracranial aneurysms in appropriately selected parent vessels
- Reconstruction of the parent artery across wide-neck, large, or fusiform aneurysm morphologies as defined in the manufacturer IFU
- Use in neurointerventional and hybrid neuroendovascular suites
- Indications, contraindications, vessel diameter range, and patient selection criteria: refer to the official Stryker Surpass Evolve Instructions for Use
Product Information
- Brand: Stryker
- Product line: Surpass Evolve Flow Diverter
- Category: Flow Diverter / Neurovascular Implant
- REF / UPN: FD40015
- Nominal diameter: 4.00 mm
- Nominal length: 15 mm
- Implant material: Cobalt chromium and platinum tungsten braided wires
- Delivery: Preloaded on delivery wire for microcatheter introduction
- Sterility: Sterile, single-use
- Compatible microcatheter inner diameter and recommended guide/access system: Not specified in the located sources
- Shelf life and storage conditions: Not specified in the located sources
- Regulatory clearances vary by region; confirm availability and approved indications with Stryker prior to procurement
REF / UPNFD40015
Size4.00 x 15, 15 mm
Stryker Surpass EvolveSurpass Evolve flow diverterFD40015flow diverter 4.00 x 15 mmintracranial aneurysm flow diverterneurovascular flow diverterbraided flow diverting stentcobalt chromium flow diverterStryker neurovascular implantendovascular aneurysm treatmentwide neck aneurysm deviceparent artery reconstruction stentneurointerventional flow diverterStryker FD40015flow diverting stent 4mm
How It Works
1
Submit Your Request
Tell us what product you need and share a few details.
2
We Match You
We connect your request with the most relevant verified brands.
3
Receive Offers
Relevant supplier options can respond with availability, documentation context, and quote details.
Related Products
Related products
FRED Junior System 2.5 | REF FREDJR2513
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2513) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 2.5 | REF FREDJR2520
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2520) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller-diameter parent vessels.
FRED Junior System 2.5 | REF FREDJR2526
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2526) is a low-profile flow diverter designed for the endovascular treatment of intracranial aneurysms in distal and small-vessel anatomy.
FRED Junior System 3.0 | REF FREDJR3009
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3009) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller distal vessels.
FRED Junior System 3.0 | REF FREDJR3014
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3014) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 3.0 | REF FREDJR3021
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3021) — flow diverter device intended for neurovascular use; specific dimensional and configuration details: Not specified in the located sources.
FRED Junior System 3.0 | REF FREDJR3027
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3027) is a low-profile flow diverter device intended for endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED System 3.5 | REF FRED3507
Terumo Neuro FRED System 3.5 (REF FRED3507) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3511
Terumo Neuro FRED System 3.5 (REF FRED3511) flow diverter for endovascular neurovascular procurement.
FRED System 3.5 | REF FRED3516
Terumo Neuro FRED System 3.5 (REF FRED3516) is a flow diverter device designed for endovascular treatment of intracranial aneurysms, supplied as a sterile, single-use implant with delivery system.
FRED System 3.5 | REF FRED3524
FRED System 3.5 (REF FRED3524) by Terumo Neuro is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3536
Terumo Neuro FRED System 3.5 (REF FRED3536) — Flow Re-Direction Endoluminal Device for endovascular treatment of intracranial aneurysms.
FRED System 4.0 | REF FRED4007
Terumo Neuro FRED System 4.0 (REF FRED4007) is a flow diverter device designed for the endovascular treatment of intracranial aneurysms, featuring a dual-layer braided self-expanding stent design.
Buyer support
Frequently asked questions about Stryker Surpass Evolve Flow Diverter 4.00 x 15 mm | REF FD40015
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.