FRED Junior System 2.5 | REF FREDJR2508
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2508) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
The Stryker Surpass Evolve Flow Diverter (REF FD32517, 3.25 x 17 mm) is a self-expanding, braided intracranial flow-diverting stent designed for endovascular reconstruction of the parent artery in the management of intracranial aneurysms. The device is delivered through a microcatheter and provides high mesh density to redirect blood flow away from the aneurysm sac while preserving flow in adjacent perforators and branch vessels.
Key Features
- Braided flow-diverting design engineered to promote aneurysm occlusion through hemodynamic flow redirection.
- 64-wire braid construction for high mesh density and consistent porosity along the working length.
- Cobalt-chromium alloy wires with platinum-tungsten drawn-filled tubing for radiopacity and visualization under fluoroscopy.
- Self-expanding deployment compatible with standard 0.027 inch inner diameter microcatheters (confirm compatibility per current IFU).
- Nominal sizing: 3.25 mm vessel diameter x 17 mm working length.
- Resheathable/repositionable behavior during partial deployment to support accurate landing zone placement (refer to IFU for limits).
Clinical Applications
- Endovascular treatment of intracranial aneurysms in suitably sized parent vessels.
- Reconstruction of wide-neck, fusiform, or complex aneurysm morphologies where flow diversion is indicated.
- Use in neurointerventional and neuroendovascular procedures performed by trained physicians. Indications, contraindications, warnings and patient selection criteria are defined by the current manufacturer Instructions for Use.
Product Information
- Brand: Stryker
- Product line: Surpass Evolve Flow Diverter
- Category: Flow Diverter
- REF / UPN: FD32517
- Device diameter: 3.25 mm
- Device length: 17 mm
- Material: Cobalt-chromium alloy with platinum-tungsten radiopaque wires
- Configuration: 64-wire braided self-expanding implant, pre-loaded on a delivery system
- Sterility: Supplied sterile for single use
- Microcatheter compatibility: Refer to current Stryker Surpass Evolve IFU
- Regulatory status: Not specified in the located sources — verify regional clearance and approved indications with Stryker prior to procurement.
REF / UPNFD32517
Size3.25 x 17, 17 mm
Stryker Surpass EvolveSurpass Evolve flow diverterFD32517flow diverter 3.25 x 17 mmintracranial flow diverterneurovascular flow diverterintracranial aneurysm deviceendovascular aneurysm treatmentbraided flow divertercobalt chromium flow diverterneurointervention implantwide neck aneurysm flow diverterStryker Neurovascularflow diversion stentB2B medical device procurement
How It Works
1
Submit Your Request
Tell us what product you need and share a few details.
2
We Match You
We connect your request with the most relevant verified brands.
3
Receive Offers
Relevant supplier options can respond with availability, documentation context, and quote details.
Related Products
Related products
FRED Junior System 2.5 | REF FREDJR2513
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2513) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 2.5 | REF FREDJR2520
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2520) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller-diameter parent vessels.
FRED Junior System 2.5 | REF FREDJR2526
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2526) is a low-profile flow diverter designed for the endovascular treatment of intracranial aneurysms in distal and small-vessel anatomy.
FRED Junior System 3.0 | REF FREDJR3009
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3009) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller distal vessels.
FRED Junior System 3.0 | REF FREDJR3014
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3014) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 3.0 | REF FREDJR3021
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3021) — flow diverter device intended for neurovascular use; specific dimensional and configuration details: Not specified in the located sources.
FRED Junior System 3.0 | REF FREDJR3027
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3027) is a low-profile flow diverter device intended for endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED System 3.5 | REF FRED3507
Terumo Neuro FRED System 3.5 (REF FRED3507) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3511
Terumo Neuro FRED System 3.5 (REF FRED3511) flow diverter for endovascular neurovascular procurement.
FRED System 3.5 | REF FRED3516
Terumo Neuro FRED System 3.5 (REF FRED3516) is a flow diverter device designed for endovascular treatment of intracranial aneurysms, supplied as a sterile, single-use implant with delivery system.
FRED System 3.5 | REF FRED3524
FRED System 3.5 (REF FRED3524) by Terumo Neuro is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3536
Terumo Neuro FRED System 3.5 (REF FRED3536) — Flow Re-Direction Endoluminal Device for endovascular treatment of intracranial aneurysms.
FRED System 4.0 | REF FRED4007
Terumo Neuro FRED System 4.0 (REF FRED4007) is a flow diverter device designed for the endovascular treatment of intracranial aneurysms, featuring a dual-layer braided self-expanding stent design.
Buyer support
Frequently asked questions about Stryker Surpass Evolve Flow Diverter 3.25 x 17 mm | REF FD32517
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.