FRED Junior System 2.5 | REF FREDJR2508
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2508) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
The FRED X Flow Diverter Stent from Terumo Neuro (REF XFRED3014, 3.0 mm x 19 mm) is a self-expanding, dual-layer braided intracranial implant designed for endovascular reconstruction of the parent artery in the treatment of intracranial aneurysms. The FRED X platform builds on the established FRED design by adding a covalently bonded surface modification intended to reduce material thrombogenicity while preserving the device's deployment characteristics.
Key Features
Dual-layer braided design combining an inner low-porosity flow-diverting mesh and an outer high-porosity stent for wall apposition.
Surface modification (FRED X technology) intended to reduce platelet adhesion and material thrombogenicity.
Distinct radiopaque markers at the proximal and distal ends and helical tantalum strands for fluoroscopic visualization.
Self-expanding nitinol construction for conformability in tortuous neurovascular anatomy.
Resheathable and repositionable prior to final detachment, supporting controlled placement.
Delivered through a compatible microcatheter for use over standard neurointerventional workflows.
Clinical Applications
Endovascular flow diversion of intracranial aneurysms in appropriately selected vessels.
Reconstruction of the parent artery across wide-neck, fusiform, or otherwise complex aneurysm morphologies as determined by the treating physician.
Use within the labeled vessel diameter range corresponding to the 3.0 mm device size.
Product Information
Brand: Terumo Neuro
Product: FRED X Flow Diverter Stent
Category: Flow Diverter
REF/UPN: XFRED3014
Nominal Diameter: 3.0 mm
Nominal Length: 19 mm
Construction: Dual-layer braided nitinol with tantalum radiopaque elements
Surface Treatment: FRED X anti-thrombogenic surface modification
Delivery: Pre-loaded on a delivery wire for microcatheter delivery
Microcatheter Compatibility: Not specified in the located sources
Sterilization: Not specified in the located sources
Single Use: Yes — disposable, single-patient use
Regulatory Status: Refer to the manufacturer's Instructions for Use for region-specific clearances and indications.
REF / UPNXFRED3014
Size3.0 x 19
FRED X flow diverterTerumo Neuro FRED XXFRED3014FRED X 3.0 x 19flow diverter stentintracranial flow diverterdual-layer flow diverterneurovascular stentintracranial aneurysm deviceendovascular aneurysm treatmentbraided nitinol stentsurface modified flow diverterneurointervention implantB2B medical device sourcingflow diverter catalog
How It Works
1
Submit Your Request
Tell us what product you need and share a few details.
2
We Match You
We connect your request with the most relevant verified brands.
3
Receive Offers
Relevant supplier options can respond with availability, documentation context, and quote details.
Related Products
Related products
FRED Junior System 2.5 | REF FREDJR2513
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2513) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 2.5 | REF FREDJR2520
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2520) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller-diameter parent vessels.
FRED Junior System 2.5 | REF FREDJR2526
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2526) is a low-profile flow diverter designed for the endovascular treatment of intracranial aneurysms in distal and small-vessel anatomy.
FRED Junior System 3.0 | REF FREDJR3009
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3009) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller distal vessels.
FRED Junior System 3.0 | REF FREDJR3014
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3014) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 3.0 | REF FREDJR3021
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3021) — flow diverter device intended for neurovascular use; specific dimensional and configuration details: Not specified in the located sources.
FRED Junior System 3.0 | REF FREDJR3027
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3027) is a low-profile flow diverter device intended for endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED System 3.5 | REF FRED3507
Terumo Neuro FRED System 3.5 (REF FRED3507) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3511
Terumo Neuro FRED System 3.5 (REF FRED3511) flow diverter for endovascular neurovascular procurement.
FRED System 3.5 | REF FRED3516
Terumo Neuro FRED System 3.5 (REF FRED3516) is a flow diverter device designed for endovascular treatment of intracranial aneurysms, supplied as a sterile, single-use implant with delivery system.
FRED System 3.5 | REF FRED3524
FRED System 3.5 (REF FRED3524) by Terumo Neuro is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3536
Terumo Neuro FRED System 3.5 (REF FRED3536) — Flow Re-Direction Endoluminal Device for endovascular treatment of intracranial aneurysms.
FRED System 4.0 | REF FRED4007
Terumo Neuro FRED System 4.0 (REF FRED4007) is a flow diverter device designed for the endovascular treatment of intracranial aneurysms, featuring a dual-layer braided self-expanding stent design.
Buyer support
Frequently asked questions about FRED X Flow Diverter Stent 3.0 x 19 | REF XFRED3014
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.