FRED Junior System 2.5 | REF FREDJR2508
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2508) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
The FRED System 5.5 (REF FRED5526) from Terumo Neuro is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms. The device combines an inner low-porosity braid with an outer high-porosity stent in a single delivery system, intended to support flow diversion across the aneurysm neck while maintaining vessel wall apposition.
Key Features
Dual-layer design integrating an inner flow-diverting braid and an outer stent in one device.
Nominal device diameter of 5.5 mm for use in appropriately sized parent vessels.
Radiopaque markers to support fluoroscopic visualization during navigation, deployment, and post-deployment assessment.
Pre-loaded delivery system intended for use through compatible microcatheters as defined by the manufacturer's instructions for use.
Resheathing capability prior to full deployment as described in the official IFU.
Clinical Applications
Endovascular flow diversion in the treatment of intracranial aneurysms in vessels matching the device sizing range.
Use within neurointerventional procedures performed by trained physicians in a suitably equipped angiography suite.
Indications, contraindications, warnings, and precautions are defined by the manufacturer's official labeling and may vary by region.
Product Information
Brand: Terumo Neuro
Product: FRED System 5.5
REF / UPN: FRED5526
Category: Flow Diverter
Device Diameter: 5.5 mm (nominal)
Working Length: Not specified in the located sources
Device Length: Not specified in the located sources
Recommended Microcatheter: Not specified in the located sources
Sterility: Supplied sterile for single use as described in the manufacturer's IFU
Regulatory Status: Refer to the manufacturer's regional labeling
REF / UPNFRED5526
Size
FRED System 5.5FRED5526Terumo Neuro flow diverterFRED flow diverterdual layer flow diverterintracranial aneurysm deviceneurovascular flow diverterendovascular aneurysm treatmentneurointervention deviceflow diversion stentcerebral aneurysm flow diverterTerumo Neuro FREDneurovascular implantB2B medical device sourcinginterventional neuroradiology supplies
How It Works
1
Submit Your Request
Tell us what product you need and share a few details.
2
We Match You
We connect your request with the most relevant verified brands.
3
Receive Offers
Relevant supplier options can respond with availability, documentation context, and quote details.
Related Products
Related products
FRED Junior System 2.5 | REF FREDJR2513
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2513) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 2.5 | REF FREDJR2520
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2520) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller-diameter parent vessels.
FRED Junior System 2.5 | REF FREDJR2526
Terumo Neuro FRED Junior System 2.5 (REF FREDJR2526) is a low-profile flow diverter designed for the endovascular treatment of intracranial aneurysms in distal and small-vessel anatomy.
FRED Junior System 3.0 | REF FREDJR3009
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3009) is a low-profile dual-layer flow diverter stent designed for the endovascular treatment of intracranial aneurysms in smaller distal vessels.
FRED Junior System 3.0 | REF FREDJR3014
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3014) is a low-profile dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED Junior System 3.0 | REF FREDJR3021
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3021) — flow diverter device intended for neurovascular use; specific dimensional and configuration details: Not specified in the located sources.
FRED Junior System 3.0 | REF FREDJR3027
Terumo Neuro FRED Junior System 3.0 (REF FREDJR3027) is a low-profile flow diverter device intended for endovascular treatment of intracranial aneurysms in smaller parent vessels.
FRED System 3.5 | REF FRED3507
Terumo Neuro FRED System 3.5 (REF FRED3507) is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3511
Terumo Neuro FRED System 3.5 (REF FRED3511) flow diverter for endovascular neurovascular procurement.
FRED System 3.5 | REF FRED3516
Terumo Neuro FRED System 3.5 (REF FRED3516) is a flow diverter device designed for endovascular treatment of intracranial aneurysms, supplied as a sterile, single-use implant with delivery system.
FRED System 3.5 | REF FRED3524
FRED System 3.5 (REF FRED3524) by Terumo Neuro is a dual-layer flow diverter designed for the endovascular treatment of intracranial aneurysms.
FRED System 3.5 | REF FRED3536
Terumo Neuro FRED System 3.5 (REF FRED3536) — Flow Re-Direction Endoluminal Device for endovascular treatment of intracranial aneurysms.
FRED System 4.0 | REF FRED4007
Terumo Neuro FRED System 4.0 (REF FRED4007) is a flow diverter device designed for the endovascular treatment of intracranial aneurysms, featuring a dual-layer braided self-expanding stent design.
Buyer support
Frequently asked questions about FRED System 5.5 | REF FRED5526
Practical answers for procurement teams reviewing this product page.
Include the exact product family, brand preference, REF/UPN code when available, required quantity, destination country, expected delivery timing and documentation expectations.
Yes. If alternatives are acceptable, mention equivalent brands, compatible models, size ranges and any non-negotiable requirements.
Related products are connected through structured catalog data such as brand, category, product family and country assignment.
No. This page supports sourcing and RFQ organization. Buyers must verify regulatory status, clinical suitability and procurement compliance independently.
Specific codes reduce ambiguity and help supplier teams identify product availability, packaging details and documentation faster.
Yes. The workflow is designed for hospitals, clinics, distributors, wholesalers, importers and procurement departments.
Yes. Products can be connected to multiple countries in the admin panel, and buyers can specify destination details in the RFQ form.
The request is stored with contact and procurement details so the sourcing conversation can be reviewed and followed up clearly.